What is an asphalt apron?

Photo of author
Written By Thurman Schinner

Asphalt Settlement A driveway apron is an area that connects and provides a smooth transition from the street to the driveway, and from the driveway to the garage. And if your apron starts to sink, it will not only detract from your property?s curb appeal, it can also pose serious danger.
What is an apron on a driveway?
What is a driveway apron? It?s the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.
How much does an asphalt apron cost?
An asphalt apron typically costs $2-$5 a square foot, or $360-$900 for a 12?x15? apron. However, there?s a basic cost for bringing equipment and a crew to the site, so may be a minimum charge of $500-$1,000 or more for small projects. A stamped asphalt apron can cost $5-$12 a square foot, or $900-$2,160 for 12?x15?.
What is an apron in construction?
An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.

What is the apron of the garage?
The concrete garage apron is the concrete slab in front of the garage door and is used to transition the concrete or asphalt driveway onto the garage concrete floor. This is necessary as the two surfaces are on two different grades.
What is the purpose of a driveway apron?
Driveway Apron means that portion of a regularly established driveway lying between a property line and any curb, the purpose of which is to provide vehicular access from the street across the curb, parkway and sidewalk to the property fronting thereon or abutting thereto.
Do you own your driveway apron?
Homeowners may be surprised to find they don?t own the apron portion of their driveway yet are responsible for maintaining it. In winter, the homeowner may also be responsible for removing snow from both the sidewalk and the driveway apron.
What is an asphalt apron?

See also  Can you transfer files from Vista to Windows 10?

Asphalt Settlement A driveway apron is an area that connects and provides a smooth transition from the street to the driveway, and from the driveway to the garage. And if your apron starts to sink, it will not only detract from your property?s curb appeal, it can also pose serious danger.
How wide should a driveway apron be?
Some examples of the criteria: Driveway widths. The minimum width of a driveway apron is either 10 feet or 12 feet, depending on the specific zone in which the property lies. The maximum width is 18 feet, however in some zones it is 30 feet.
What are aprons in concrete?
A concrete apron, also known as ?an approach,? is a section of concrete inserted in one of three places:

In front of a garage.
Around the perimeter of a building.
The entrance to a parking lot or driveway.

What is the difference between ramp and apron?
In the United States, the word ramp is an older term for an area where pre-flight activities were done; an apron was any area for parking and maintenance. Passenger gates are the main feature of a terminal ramp.
What is apron in civil engineering?
Civil Engineering) a ground covering of concrete or other material used to protect the underlying earth from water erosion.
What is apron slab?
An apron slab is a smooth impermeable surface constructed around a water point to prevent spilt water soaking into the ground. Apron slabs are not only used with handpumps installed over boreholes.
What is apron in box culvert?
Culverts. Apron: a smooth (generally concrete) surface that is placed between culvert and channel to improve capacity and reduce erosion. Backwater: to place a culvert or use a weir such that there will always be some depth of water within the culvert.

See also  Enter Service Mode on Hisense Smart TV ? How To

Related posts:
How thick should a driveway apron be?
Quick Answer: What is a horseshoe driveway?
FAQ: Can you DIY asphalt driveway?
Question: What is better asphalt or concrete?